LX-E5 Circulation Pump, 110V, 3/4 Barb

The LX E5 circulation pump is a 110-volt unit with 3/4" barb connections designed to replace the small 110 volt E5 in select Hot Spring Spas with the low-flow double barrel heaters. Unlike the small Laing E5, which uses a computer-controlled magnetic coil to spin a "donut magnet" impeller, this LX model features a traditional motor shaft. By using a physical shaft to drive the impeller internally, the LX pump offers a more durable design and a longer service life. Confirm your spa has room for this pump which has a slightly large motor, dimension in product image. Details: LX P/N: LX-WEE5-110 Brand: LX Volts: 110 - 120 volts ac Amps: FLA 0.5A Connections: 3/4" Barb Cord: 43" Long with no plug* Electrical Certification: ULc for Canada Applications: Hot tubs only Max flow rate: 6 GPM (22 L/min) Not self priming, must site below water level *The plug cord from your existing pump can be spliced to this pump cord. The cord on this pump cannot be disconnected from inside back of the sealed motor. Expert Tips from Emily: The discharge on this pump can be rotated to point to the left. Simply remove the two screws from the front that hold the base to the pump, rotate pump a quarter turn, line up holes with base and fasten base to pump with the two screws. Also note, the LX E5 motor and wet end seal are not serviceable. The LX-E5 is not a compatible replacement for the Laing E10. Although the LX-E5 and LX-E10 are the same size and look the same, they have different flow rates and amp ratings. The LX-E5 has a lower flow rate compared to the LX-E10.